ID 02-5






 





 




Technical Services  

Boasting one of Australia's most comprehensive design engineering facilities, Hawker Pacific holds Australian Civil Aviation Safety Authority CAR 35 and 36 Approvals for the design of modifications or repairs of airframes structures, components, engines and avionic systems. In addition the technical services group can provide full maintenance control for various aircraft types and OEM program support...
Principle Range Of Services Include:

Project Management.
Specification Development.
Avionics Design and Approval (CASA and FAA).
Structural Design and Approval (CASA and FAA).
Independent Verification and Validation of Design Data.
System Safety Analysis.
Electrical Load Analysis.
Production of Test Schedules.
Supplemental Type Certificate (STC) Development.
Systems Integration, and
Australian Defence Force Approved Engineering Organisation (AEO) Activities
Maintenance Control
OEM Program Support
Special Design Representation
Design Engineering

 

 

 

 Design Engineering provides comprehensive design coverage both locally & internationally to fleet operators, individuals and military clients to upgrade old fixed and rotary winged aircraft, and to refit new and used fixed and rotary winged aircraft to meet specific requirements.

As a result of our range of services, Design Engineering is able to guide a customer right from the initial meeting, drafting of a technical design and installation specification, all design activities and project management of any project, no matter how big or small. This provides our clients with a consistent and recognisable product with quality, cost and time benefits due to dealing with a single point of contact.
Maintenance Control

 

 

 

 

 

 

 

 

 

 

 

 Established in 2002, HP Maintenance Control provides maintenance control services on both Class "A" and Class "B" aircraft within Australia and overseas, covering both fixed and rotary wing aircraft. In addition to the standard maintenance controls services, HP Maintenance Control provides condition reporting and auditing services for leased aircraft, pre-purchase inspections including aircraft inspections and logbook reviews.

Our highly qualified Maintenance Control team are CASA authorised, and trained in the use of industry standard computer based systems such as CAMP, CESCOM, Daniels and an in-house developed program.

As part HP, Maintenance Control is able to provide guidance to the customer for maintenance and configuration control of their asset by a continuous review of all technical data that would impact the ongoing airworthiness of the aircraft.

Maintenance Control Services Include:

Maintenance Control Services for Executive and Government Aircraft.
Leased aircraft condition reports (Engines and Airframe).
AD and SB Review.
Logbook audits.
First of Type introduction to service.
Return of aircraft to Civil Register.
Insurance assessments.
Aircraft assessments.
CoR and CoA Application and Management.
Pre-purchase inspections, and
Engine Condition and Trend Monitoring.
Special Design Representation

 

 

 Hawker Pacific provides special design representation and is an authorised dealer for:

Raisbeck Engineering - including the full Raisbeck range of BeechCraft King Air and Super King Air products. (link to web site - www.raisbeck.com)
www.raisbeck.com

BLR - including the BLR B200 winglets and Bell tail boom strakes.
www.blraerospace.com
STCs Include:

 

 CASA STC# ASA097SY, B300 Modified (4 Point Harness) Executive Seat
CASA STC# ASA098SY, B300 Cabin Utility (Level) Floor.
CASA STC# ASA099SY, B300 Cabin Utility Interior.
CASA STC# ASA113SY, B200 Compressor Wash Drain.
CASA STC# ASR006SY, R22 / R44 Collective Lock.
CASA STC# SVA512, B300 Compressor Wash Drain.
Department of Transport Canada STC# A-LSH97-009, AS332L Super Puma Auxiliary
(Seat) Fuel Tank
Approvals:

 

 

HP Maintenance Control is CASA approved to carry out Maintenance Control Services on the following Aircraft Types:

Beechcraft B200 Super King Air.
Beechcraft B300 Super King Air.
Beechjet B400A.
Beechcraft Premier 1.
Bell Helicopter range.
Cessna Citation I and II.
Cessna C421.
Dassault Falcon Jet F10, and
Dassault Falcon Jet F2000.
Systems Used:

 

 HP Maintenance Control is conversant with all major maintenance control software systems and tools, including:

CAMP (Including FACTS).
Daniels.
Cesscom, and
MS Excel.

We welcome your enquiries relating to any aspect of Technical Services. Contact details are available for each site in the Locations/Contacts page accessed through the Hawker Pacific home page. Hawker Pacific Technical Services are based in Sydney and support operations across Australia, New Zealand, Asia and the Middle East.